Nickel Chromium Aluminum Foam

Product Information

An aluminium alloy is an alloy in which aluminium (Al) is the predominant metal. The typical alloying elements are copper, magnesium, manganese, silicon, tin, nickel and zinc. There are two principal classifications, namely casting alloys and wrought alloys, both of which are further subdivided into the categories heat-treatable and non-heat-treatable. About 85% of aluminium is used for wrought products, for example rolled plate, foils and extrusions. Cast aluminium alloys yield cost-effective products due to the low melting point, although they generally have lower tensile strengths than wrought alloys. The most important cast aluminium alloy system is Al–Si, where the high levels of silicon (4–13%) contribute to give good casting characteristics. Aluminium alloys are widely used in engineering structures and components where light weight or corrosion resistance is required. 

Nickel Chromium Aluminum Foam is low density permeable material with numerous applications. The defining characteristic of these foams is a very high porosity, typically 75-95% of the volume consisting of void spaces. Ceramic foam is often used for thermal insulation, acoustic insulation, adsorption of environmental pollutants, filtration of molten metal alloys, and as substrate for catalysts requiring large internal surface area. Nickel Chromium Aluminum Foam is generally immediately available in most volumes. Additional technical, research and safety (MSDS) information is available.

ATT is a professional supplier of Nickel Chromium Aluminum Foam, We also produce disc, granules, ingot, pellets, pieces, powder , rod, wire, sputtering target and in numerous other forms and custom shapes. Other shapes are available by request.

Synonyms

NiCrAl, Ni-Cr-Al, NiCrAl, Haynes 214

Nickel Chromium Aluminum Foam Specification

Size：customized

Per your request or drawing

We can customized as required

Properties (Theoretical)

Aluminum Metal Products

Applications of  Nickel Chromium Aluminum Foam

These master alloys are used in the manufacture of a wide range of metal products, including aluminium aircraft sheet, special steels and super alloys for aircraft engines, products for aerospace applications, nuclear reactors and other demanding applications.

Packing of Nickel Chromium Aluminum Foam

Standard Packing:

Typical bulk packaging includes palletized plastic 5 gallon/25 kg. pails, fiber and steel drums to 1 ton super sacks in full container (FCL) or truck load (T/L) quantities. Research and sample quantities and hygroscopic, oxidizing or other air sensitive materials may be packaged under argon or vacuum. Solutions are packaged in polypropylene, plastic or glass jars up to palletized 440 gallon liquid totes Special package is available on request.

ATTs’Nickel Chromium Aluminum Foam is carefully handled to minimize damage during storage and transportation and to preserve the quality of our products in their original condition.

Chemical Identifiers