Boron Foil

Product Information

ATT specializes in the production of boron high-purity foils in a wide range of thicknesses and sizes for numerous industrial uses and provides health and occupational safety information for this product. Most foils are produced from ingots for coating and thin film chemical vapor deposition (CVD) and physical vapor deposition (PVD) processes, including thermal and electron beam (E-Beam) evaporation, low temperature organic evaporation, atomic layer deposition (ALD), organometall and chemical vapor deposition (MOCVD) for specific applications such as fuel cells and solar energy. All metals range in thickness from 0.003 "to about 2mm. Some metals can also be rolled as thin as 0.001 "and are used as evaporation sources for microelectronics, optical, magnetic, MEMS, and hard-resistant coatings. Sheet size up to a maximum width of approximately 7 ". For film deposition on a glass or metal substrate, a maximum length of about 20" can be obtained, with a nominal thickness between about 0.005" and 0.020". Materials are produced by ultra-high purification processes such as crystallization, solid state and sublimation. ATT specializes in the production of custom compositions for commercial and research applications as well as new proprietary technologies. ATT also casts any rare earth metal and most other advanced materials into bars, rods or plates, and other mechanical shapes, and in solution and organometrics through other processes such as nanoparticles. We also produce boron rods, boron powder and boron plates. Other shapes are available upon request.

ATT is a professional supplier of boron foils, and we also manufacture plates, balls, ingots, balls, flakes, powders, rods, wires, sputtering targets, and many other forms and custom shapes. Other shapes are available upon request.

Synonyms

Boron Sheet Properties (Theoretical)

Applications of Boron Sheet

Amorphous boron is used as a rocket fuel igniter and in pyrotechnic flares. It gives the flares a distinctive green colour. The most important compounds of boron are boric (or boracic) acid, borax (sodium borate) and boric oxide. These can be found in eye drops, mild antiseptics, washing powders and tile glazes.

Packing of Boron Sheet

Standard Packing:

Typical bulk packaging includes palletized plastic 5 gallon/25 kg. pails, fiber and steel drums to 1 ton super sacks in full container (FCL) or truck load (T/L) quantities. Research and sample quantities and hygroscopic, oxidizing or other air sensitive materials may be packaged under argon or vacuum. Solutions are packaged in polypropylene, plastic or glass jars up to palletized 440 gallon liquid totes Special package is available on request.

ATTs’Boron Sheet is carefully handled to minimize damage during storage and transportation and to preserve the quality of our products in their original condition.

Chemical Identifiers