Product Code : ME-Ca-5N-TA
Calcium bands are often used as a strong, lightweight outer coating. In addition, tape can act as an adhesive to hold two objects together. ATT produces a number of standard grades where applicable, including the Mil Spec(military grade); ACS, reagent and technical grade; Food, agricultural and pharmaceutical grades; Optical grades, USP and EP/BP(European Pharmacopoeia/British Pharmacopoeia), and follow applicable ASTM test standards. ATT specializes in the production of high purity calcium strips and tablets of various thicknesses and sizes for a variety of industrial uses and provides health and occupational safety information for this product. Most tapes are produced from ingots for coating and film chemical vapor deposition (CVD) and physical vapor deposition (PVD) processes, including thermal and electron beam (E-Beam) evaporation, low temperature organic evaporation, atomic layer deposition (ALD), organometallic and chemical vapor deposition (MOCVD) for specific applications such as fuel cells and solar energy. Calcium bands are usually long, thin bands of metallic calcium. All metals range in thickness from 0.003 inches to about 2mm. Some metals can also be rolled as thin as 0.001 "and are used as evaporation sources for microelectronics, optical, magnetic, MEMS, and hard-resistant coatings. The maximum width of the sheet size is approximately 7 inches. For depositing a film on a glass or metal substrate, the maximum length that can be obtained is about 20" and the nominal thickness is about 0.005" to 0.020". The material is produced by ultra-high purification process such as crystallization, solid state and sublimation. ATT specializes in the production of custom compositions for commercial and research applications as well as new proprietary technologies. ATT also casts any rare earth metal and most other advanced materials into bars, rods, or sheets, as well as other mechanical shapes, and is cast in solution and organic metrology by other processes, such as nanoparticles.
ATT is a professional supplier of calcium concentrates, and we also produce flakes, balls, ingots, balls, flakes, powders, rods, wires, sputtering targets, and many other forms and custom shapes. Other shapes are available upon request.
Please contact us if you need customized services. We will contact you with the price and availability in 24 hours.
| Product | Product Code | Purity | Size | Contact Us |
Product Information
Calcium bands are often used as a strong, lightweight outer coating. In addition, tape can act as an adhesive to hold two objects together. ATT produces a number of standard grades where applicable, including the Mil Spec(military grade); ACS, reagent and technical grade; Food, agricultural and pharmaceutical grades; Optical grades, USP and EP/BP(European Pharmacopoeia/British Pharmacopoeia), and follow applicable ASTM test standards. ATT specializes in the production of high purity calcium strips and tablets of various thicknesses and sizes for a variety of industrial uses and provides health and occupational safety information for this product. Most tapes are produced from ingots for coating and film chemical vapor deposition (CVD) and physical vapor deposition (PVD) processes, including thermal and electron beam (E-Beam) evaporation, low temperature organic evaporation, atomic layer deposition (ALD), organometallic and chemical vapor deposition (MOCVD) for specific applications such as fuel cells and solar energy. Calcium bands are usually long, thin bands of metallic calcium. All metals range in thickness from 0.003 inches to about 2mm. Some metals can also be rolled as thin as 0.001 "and are used as evaporation sources for microelectronics, optical, magnetic, MEMS, and hard-resistant coatings. The maximum width of the sheet size is approximately 7 inches. For depositing a film on a glass or metal substrate, the maximum length that can be obtained is about 20" and the nominal thickness is about 0.005" to 0.020". The material is produced by ultra-high purification process such as crystallization, solid state and sublimation. ATT specializes in the production of custom compositions for commercial and research applications as well as new proprietary technologies. ATT also casts any rare earth metal and most other advanced materials into bars, rods, or sheets, as well as other mechanical shapes, and is cast in solution and organic metrology by other processes, such as nanoparticles.
ATT is a professional supplier of calcium concentrates, and we also produce flakes, balls, ingots, balls, flakes, powders, rods, wires, sputtering targets, and many other forms and custom shapes. Other shapes are available upon request.
Synonyms
Calcium Tape Properties (Theoretical)
| Molecular Weight | 40.07 |
| Appearance | Silvery |
| Melting Point | 839 °C |
| Boiling Point | 1484 °C |
| Density | 1.55 g/cm3 |
| Solubility in H2O | N/A |
| Electrical Resistivity | 3.91 microhm-cm @ 0 °C |
| Electronegativity | 1.0 Paulings |
| Heat of Fusion | 2.23 Cal/gm mole |
| Heat of Vaporization | 36.74 K-Cal/gm atom at 2467 °C |
| Poisson's Ratio | 0.31 |
| Specific Heat | 0.156 Cal/g/K @ 25 °C |
| Tensile Strength | N/A |
| Thermal Conductivity | 2.01 W/cm/K @ 298.2 K |
| Thermal Expansion | (25 °C) 22.3 µm·m-1·K-1 |
| Vickers Hardness | N/A |
| Young's Modulus | 20 GPa |
Applications of Calcium Tape
Calcium is also used in the production of some metals, as an allying agent. Calcium carbonate is used to make cement and mortar and also in the glass industry. alcium carbonate is also added to toothpaste and mineral supplements. Calcium carbide is used to make plastics and to make acetylene gas.
Packing of Calcium Tape
Standard Packing:
Typical bulk packaging includes palletized plastic 5 gallon/25 kg. pails, fiber and steel drums to 1 ton super sacks in full container (FCL) or truck load (T/L)s quantities. Research and sample quantities and hygroscopic, oxidizing or other air sensitive materials may be packaged under argon or vacuum. Solutions are packaged in polypropylene, plastic or glass jars up to palletized 440 gallon liquid totes Special package is available on request.
ATTs’Calcium Tape is carefully handled to minimize damage during storage and transportation and to preserve the quality of our products in their original condition.
Chemical Identifiers
| Linear Formula | Ca |
| MDL Number | MFCD00085314 |
| EC No. | 231-179-5 |
| Beilstein/Reaxys No. | 4241647 |
| Pubchem CID | 5460341 |
| SMILES | [Ca] |
| InchI Identifier | InChI=1S/Ca |
| InchI Key | OYPRJOBELJOOCE-UHFFFAOYSA-N |
