Product Code : AL-Ni75-NN-PO
A family of nickel-based high-temperature low creep superalloys. Nimonic alloys typically consist of more than 50% nickel and 20% chromium with additives such as titanium and aluminium. Alloy 75 (UNS N06075, Nimonic 75) is a 80/20 nickel-chromium alloy with controlled additions of titanium and carbon. Nimonic 75 has good mechanical properties and oxidation resistance at high temperatures. Alloy 75 is most commonly used for sheet metal fabrications which require oxidation and scaling resistance together with medium strength at high operating temperatures. Alloy 75 (Nimonic 75) is also used in gas turbine engines, for components of industrial furnaces, for heat treating equipment and fixtures, and in nuclear engineering.
Please contact us if you need customized services. We will contact you with the price and availability in 24 hours.
| Product | Product Code | Purity | Size | Contact Us |
Product Information
A family of nickel-based high-temperature low creep superalloys. Nimonic alloys typically consist of more than 50% nickel and 20% chromium with additives such as titanium and aluminium. Alloy 75 (UNS N06075, Nimonic 75) is a 80/20 nickel-chromium alloy with controlled additions of titanium and carbon. Nimonic 75 has good mechanical properties and oxidation resistance at high temperatures. Alloy 75 is most commonly used for sheet metal fabrications which require oxidation and scaling resistance together with medium strength at high operating temperatures. Alloy 75 (Nimonic 75) is also used in gas turbine engines, for components of industrial furnaces, for heat treating equipment and fixtures, and in nuclear engineering.
Nimonic 75 Powder Specification
Size：customized
Purity: customized
Per your request or drawing
We can customized as required
| Rod, Bar, Wire and Forging Stock | BS HR 5, BS HR 504, DIN 17752, AECMA PrEN2306, AECMA PrEN2307, AECMA PrEN2306, AECMA Pr EN2307, AECMA PrEN2402, ISO 9723, ISO 9724, ISO 9725, MSRR 7004 |
| Plate, Sheet, Strip | BS HR 203, DIN 17750, AECMA PrEN2293, AECMA PrEN2302, AECMA PrEN2411, ISO 6208, MSRR 7104 |
| Pipe and Tube | BS HR 403, DIN 17751, AECMA PrEN2294, ISO 6207 |
| Other | DIN 17742, AECMA PrEN2308, Werkstoff Nr 2.4630, W. Nr 2.4951, UNS N06075, Nimonic 75 (tradename), MSRR 7104 and MSRR 7004, AFNOR NC 20T |
Properties（Theoretical）
| Coefficient of Expansion | 11.0 μm/m °C (20 – 100°C) |
| Modulus of Rigidity | 75.6 kN/mm² |
| Modulus of Elasticity | 206 /mm² |
| Density | 8.37 g/cm3 |
| Tensile Strength | 750 Mpa |
| Yield Strength: | 275 Mpa |
| Modulus of Elasticity: | 206 Gpa |
| Melting Range | 1340-1380°C |
| Element | Min % | Max % |
| Ti | 0.2 | 0.5 |
| C | 0.08 | 0.15 |
| Cr | 19 | 21 |
| Cu | – | 0.5 |
| Fe | – | 5 |
| Pb | – | 0.005 |
| P | – | 0.015 |
| Al | – | 0.4 |
| Si | – | 0.3 |
| Mn | – | 1 |
| S | – | 0.15 |
| Co | – | 5 |
| Ni | bal |
Applications of Nimonic 75 Powder
Aerospace fasteners
Gas turbine engineering
Industrial furnace structural parts
Heat treatment equipments
Nuclear engineering
Packing of Nimonic 75 Powder
Standard Packing:
Typical bulk packaging includes palletized plastic 5 gallon/25 kg. pails, fiber and steel drums to 1 ton super sacks in full container (FCL) or truck load (T/L) quantities. Research and sample quantities and hygroscopic, oxidizing or other air sensitive materials may be packaged under argon or vacuum. Solutions are packaged in polypropylene, plastic or glass jars up to palletized 440 gallon liquid totes Special package is available on request.
ATTs’ Nimonic 75 Powder is carefully handled to minimize damage during storage and transportation and to preserve the quality of our products in their original condition.
