Home > Products > Metal & Alloys > Indium Metal And Alloys > Indium Rods (In Rods)

Indium Rods (In Rods)

Product Code : ME-In-6N-BR

ATT specializes in producing high purity Indium Rod with the highest possible density and smallest possible average grain sizes for use in semiconductor, Chemical Vapor Deposition (CVD) and Physical Vapor Deposition (PVD) processes including Thermal and Electron Beam (E-Beam) Evaporation, Low Temperature Organic Evaporation, Atomic Layer Deposition (ALD), Metallic-Organic and Chemical Vapor Deposition (MOCVD). Our standard rod sizes range from 1/8" x 1/8" to 1/4" x 1/4" and 3 mm diameter. We can also provide Rod outside this range and deposition materials for specific applications such as fuel cells and solar energy and for thin film deposition on glass or metal substrates. Materials are produced using crystallization, solid state and other ultra high purification processes such as sublimation.ATT specializes in producing custom compositions for commercial and research applications and for new proprietary technologies. ATT casts any of the rare earth metals and most other advanced materials into rod, bar, or plate form, as well as other machined shapes and through other processes such as nanoparticles and in the form of solutions and organometallics. We have a variety of standard sized rod molds. We also produce Indium as powder, ingot, pieces, pellets, disc, granules, wire, and in compound forms, such as oxide. Other shapes are available by request.

Please contact us if you need customized services. We will contact you with the price and availability in 24 hours.

Product Product Code Purity Size Contact Us
Indium RodME-In-2N-BR99%Customized
Indium RodME-In-3N-BR99.9%Customized
Indium RodME-In-4N-BR99.99%Customized
Indium RodME-In-5N-BR99.999%Customized
Indium RodME-In-6N-BR99.9999%Customized

Product Information

ATT specializes in producing high purity Indium Rod with the highest possible density and smallest possible average grain sizes for use in semiconductor, Chemical Vapor Deposition (CVD) and Physical Vapor Deposition (PVD) processes including Thermal and Electron Beam (E-Beam) Evaporation, Low Temperature Organic Evaporation, Atomic Layer Deposition (ALD), Metallic-Organic and Chemical Vapor Deposition (MOCVD). Our standard rod sizes range from 1/8" x 1/8" to 1/4" x 1/4" and 3 mm diameter. We can also provide Rod outside this range and deposition materials for specific applications such as fuel cells and solar energy and for thin film deposition on glass or metal substrates. Materials are produced using crystallization, solid state and other ultra high purification processes such as sublimation.ATT specializes in producing custom compositions for commercial and research applications and for new proprietary technologies. ATT casts any of the rare earth metals and most other advanced materials into rod, bar, or plate form, as well as other machined shapes and through other processes such as nanoparticles and in the form of solutions and organometallics. We have a variety of standard sized rod molds. We also produce Indium as powder, ingot, pieces, pellets, disc, granules, wire, and in compound forms, such as oxide. Other shapes are available by request.


Synonyms

43249, 43388

Indium Rod Specification

Size:Our standard rod sizes range from 1/8" x 1/8" to 1/4" x 1/4" and 3 mm diameter. 

Per your request or drawing

We can customized as required


Indium Rod Products

MaterialsIn
Plate
Sheet
Strip
Rod
Sputtering Target
Tube

Other: Spherical Indium Powder, Indium crucibles, Indium nuts, Indium bolts, Indium heating elements, and Indium shielding screens.


Chemical Composition:

Purity4N4N5
In99.99%99.995%
Impurities, ppm, max.
Cu55
Pb105
Zn155
Cd155
Fe85
Tl105
Sn1510
As55
Al75


Properties (Theoretical)

Molecular Weight114.82
AppearanceSilvery
Melting Point156.6 °C
Boiling Point2080 °C
Density7310 kg/m3
Solubility in H2ON/A
Electrical Resistivity8.37 microhm-cm @ 20 °C
Electronegativity1.7 Paulings
Heat of Fusion0.781 Cal/gm mole
Heat of Vaporization53.7 K-Cal/gm atom at 2080 °C
Poisson's Ratio0.4498
Specific Heat0.056 Cal/g/K @ 25 °C
Tensile StrengthN/A
Thermal Conductivity0.818 W/cm/K @ 298.2 K
Thermal Expansion(25 °C) 32.1 µm·m-1·K-1
Vickers Hardness<10
Young's Modulus11 GPa


Applications of  Indium Rod

Indium is mainly used as the raw material of higher bearings. Because indium has strong anti-corrosion and anti-wear ability, indium plated on bearings can change the strength and hardness of bearings to the corrosion resistance of lubricants. These high-speed bearings are mainly used in aviation, Marine vessels and automobile engines, and indium can also be plated on the surface of steel, iron and non-ferrous metals for corrosion protection.


Packing of Indium Rod

Standard Packing:

Typical bulk packaging includes palletized plastic 5 gallon/25 kg. pails, fiber and steel drums to 1 ton super sacks in full container (FCL) or truck load (T/L) quantities. Research and sample quantities and hygroscopic, oxidizing or other air sensitive materials may be packaged under argon or vacuum. Solutions are packaged in polypropylene, plastic or glass jars up to palletized 440 gallon liquid totes Special package is available on request.

ATTs’ Indium Rod is carefully handled to minimize damage during storage and transportation and to preserve the quality of our products in their original condition.

Chemical Identifiers

Linear FormulaIn
CAS7440-74-6
MDL NumberMFCD00134048
EC No.231-180-0
Beilstein/Reaxys No.N/A
Pubchem CID5359967
SMILES[In]
InchI IdentifierInChI=1S/In
InchI KeyAPFVFJFRJDLVQX-UHFFFAOYSA-N


Related Products
(518)606-3901
(518)606-3901