Home > Products > Metal & Alloys > Other Metal And Alloys > Lead Metal and Alloys > Lead Rod

Lead Rod

Product Code : ME-Pb-5N-BR

ATT specializes in producing high-purity lead rods with the highest density and smallest average grain size for semiconductor, chemical vapor deposition (CVD) and physical vapor deposition (PVD) processes, including thermal and electron beam (E-Beam) evaporation, low temperature organic evaporation, atomic layer deposition (ALD), metal-organic and chemical vapor deposition (MOCVD). Our standard rod sizes range from 1/8 "x 1/8" to 1/4 "x 1/4" and 3 mm diameter. We can also offer rods and deposition materials beyond this range for specific applications such as fuel cells and solar energy, as well as thin film deposition on glass or metal substrates. Materials are produced by ultra-high purification processes such as crystallization, solid state and sublimation. ATT specializes in the production of custom compositions for commercial and research applications as well as new proprietary technologies. ATT casts any rare earth metal and most other advanced materials into bars, rods, or plates, as well as other mechanical shapes, and through other processes, such as nanoparticles, in solution and organometrics. We have a variety of standard size bar molds.

ATT is a professional supplier of lead rods, and we also manufacture tablets, balls, ingots, balls, sheets, powders, rods, threads, sputtering targets, and many other forms and custom shapes. Other shapes are available upon request.

Please contact us if you need customized services. We will contact you with the price and availability in 24 hours.

Product Product Code Purity Size Contact Us
Lead Rod ME-Pb-2N-BR 99% Customized
Lead Rod ME-Pb-3N-BR 99.9% Customized
Lead Rod ME-Pb-4N-BR 99.99% Customized
Lead Rod ME-Pb-5N-BR 99.999% Customized

Product Information

ATT specializes in producing high-purity lead rods with the highest density and smallest average grain size for semiconductor, chemical vapor deposition (CVD) and physical vapor deposition (PVD) processes, including thermal and electron beam (E-Beam) evaporation, low temperature organic evaporation, atomic layer deposition (ALD), metal-organic and chemical vapor deposition (MOCVD). Our standard rod sizes range from 1/8 "x 1/8" to 1/4 "x 1/4" and 3 mm diameter. We can also offer rods and deposition materials beyond this range for specific applications such as fuel cells and solar energy, as well as thin film deposition on glass or metal substrates. Materials are produced by ultra-high purification processes such as crystallization, solid state and sublimation. ATT specializes in the production of custom compositions for commercial and research applications as well as new proprietary technologies. ATT casts any rare earth metal and most other advanced materials into bars, rods, or plates, as well as other mechanical shapes, and through other processes, such as nanoparticles, in solution and organometrics. We have a variety of standard size bar molds.

ATT is a professional supplier of lead rods, and we also manufacture tablets, balls, ingots, balls, sheets, powders, rods, threads, sputtering targets, and many other forms and custom shapes. Other shapes are available upon request.


Synonyms

Lead Rod Properties (Theoretical)

Molecular Weight207.2
AppearanceBluish white
Melting Point327.502 °C
Boiling Point1740 °C
Density11.35 g/cm3
Solubility in H2ON/A
Electrical Resistivity20.648 microhm-cm @ 20 °C
Electronegativity1.8 Paulings
Heat of Fusion1.224 Cal/gm mole
Heat of Vaporization42.4 K-Cal/gm atom at 1740 °C
Poisson's Ratio0.44
Specific Heat0.038 Cal/g/oK @ 25 °C
Tensile StrengthN/A
Thermal Conductivity0.353 W/cm/K @ 298.2 K
Thermal Expansion(25 °C) 28.9 µm·m-1·K-1
Vickers HardnessN/A
Young's Modulus16 GPa


Applications of Lead Rod

Lead is still widely used for car batteries, pigments, ammunition, cable sheathing, weights for lifting, weight belts for diving, lead crystal glass, radiation protection and in some solders. It is often used to store corrosive liquids.


Packing of Lead Rod

Standard Packing:

Typical bulk packaging includes palletized plastic 5 gallon/25 kg. pails, fiber and steel drums to 1 ton super sacks in full container (FCL) or truck load (T/L)s quantities. Research and sample quantities and hygroscopic, oxidizing or other air sensitive materials may be packaged under argon or vacuum. Solutions are packaged in polypropylene, plastic or glass jars up to palletized 440 gallon liquid totes Special package is available on request.

ATTs’Lead Rod is carefully handled to minimize damage during storage and transportation and to preserve the quality of our products in their original condition.

Chemical Identifiers

Linear FormulaPb
MDL NumberMFCD00134050
EC No.231-100-4
Beilstein/Reaxys No.N/A
Pubchem CID5352425
SMILES[Pb]
InchI IdentifierInChI=1S/Pb
InchI KeyWABPQHHGFIMREM-UHFFFAOYSA-N


Related Products
(518)606-3901
(518)606-3901