Molybdenum boat is also known as evaporated molybdenum boat or coated molybdenum boat, it is made of molybdenum sheet after high temperature stamping molding, can be used in 1400℃~1900℃ above the condition of a molybdenum base alloy. There are stamping boats, folding boats and other different types.

Tungsten foil is a thin slice of tungsten, with a purity greater than 99.9%, a thickness of 0.05-0.5mm, a width of 5-400mm and a length of 50-1500mm. Its surface states include alkali pickling surface, annealing surface and polished surface.

Tungsten and tungsten sheet is made by rolling high-purity tungsten metal.The purity of tungsten sheet ≥ 99.95%.Tungsten plates with different surface treatments: hot-rolled alkaline cleaning, electrolytic polish, machined, or polished.

Tungsten crucible melting point 3420℃, the use of ambient temperature is generally above 2400℃. Tungsten crucible is widely used in sapphire crystal growth, quartz glass smelting, vacuum coating, rare earth smelting and other industries.

Tungsten tube is mainly used in high temperature furnace thermocouple protection tube, sapphire single crystal furnace, high temperature sintering furnace support parts. Tungsten tube has quite high purity, generally purity ≥ 99.95%.

ATT is a professional supplier of high-purity Lithium Foil. The purity can be 99.99%(4N), 99.995%(4N5), 99.999%(5N). Lithium Metal is available as disc, granules, ingot, pellets, pieces, powder , rod, wire, sputtering target and in numerous other forms and custom shapes.

Alnico magnets have the best temperature coefficients of any magnet material. Alnico magnets are a best choice in extremely high temperature applications.

Nickel, iron and/or copper serve as a metal binder matrix,Tungsten nickel-iron alloy, also known as tungsten alloy, has many excellent properties such as high melting point, high density, good elongation capacity, and so on.

Nickel powders are widely used in thousands of products. Nickel is very corrosion-resistant and has a very high melting point of 1,455 °C. At room temperature, nickel is one of the few ferromagnetic metals, but becomes non-magnetic above 355 °C.

Tungsten heavy alloys are the tungsten alloys consisting of W-Ni-Fe or W-Ni-Cu. The tungsten content varies from 90% to 98%. Nickel, iron and/or copper serve as a metal binder matrix,Tungsten nickel-iron alloy, also known as tungsten alloy, has many excellent properties such as high melting point, high density, good elongation capacity, and so on.

Tungsten heavy alloys are the tungsten alloys consisting of W-Ni-Fe or W-Ni-Cu. The tungsten content varies from 90% to 98%. Nickel, iron and/or copper serve as a metal binder matrix,Tungsten nickel-iron alloy, also known as tungsten alloy, has many excellent properties such as high melting point, high density, good elongation capacity, and so on.

tungsten heavy alloys are the tungsten alloys consisting of W-Ni-Fe or W-Ni-Cu. The tungsten content varies from 90% to 98%. Nickel, iron and/or copper serve as a metal binder matrix,Tungsten nickel-iron alloy, also known as tungsten alloy, has many excellent properties such as high melting point, high density, good elongation capacity, and so on.

Tantalum tungsten hafnium alloy is made from a certain amount of tungsten and hafnium added to the base of tantalum. tantalum tungsten hafnium alloy has excellent thermal stability and high creep strength in the temperature range from 93 ˚C to 1426˚C.

TZM alloy, also called TZM molybdenum alloy, refers to the Titanium-Zirconium-Molybdenum alloy. TZM Alloy contains 0.50% Titanium, 0.08% Zirconium and 0.02% Carbon. TZM Molybdenum Alloy is manufactured by either P/M or Arc Cast technologies.

Nitinol spring is a type of shape memory spring. Nitinol is a nickel-titanium alloy with the typical ratio 40-50% nickel, 50-60% titanium known as a shape memory alloy (SMA), a metal alloy that demonstrates pseudo-elasticity and the shape memory effect. The shape memory effect is when a material returns to its pre-deformed shape by heating.

Niobium titanium alloy Foil is made of NbTi alloyed ingots, through drilling holes, drawing, rolling, annealing process, finally the tubes are finished. The chemical content of niobium and titanium can be customized by each client. The common compositions are Nb50%-Ti50%, Nb53%-Ti47% and Nb45%-Ti55%.

Niobium titanium alloy Rod & Bar is made of NbTi alloyed ingots, through drilling holes, drawing, rolling, annealing process, finally the tubes are finished. The chemical content of niobium and titanium can be customized by each client. The common compositions are Nb50%-Ti50%, Nb53%-Ti47% and Nb45%-Ti55%.

Niobium titanium alloy Sheets / Boards is made of NbTi alloyed ingots, through drilling holes, drawing, rolling, annealing process, finally the tubes are finished. The chemical content of niobium and titanium can be customized by each client. The common compositions are Nb50%-Ti50%, Nb53%-Ti47% and Nb45%-Ti55%.

Niobium is used as the base metal, adding no more than 10% of the metallic elements such as tungsten, molybdenum, tantalum, vanadium, titanium, zirconium, hafnium and a small amount of carbon to form a solid solution strengthened and a small amount of ZrO2 and C precipitation strengthened niobium alloys, such as Nb752.