Product Code : RE-Sc-5N-SF
ATT specializes in producing Scandium High Purity Foil and sheets in many thicknesses and sizes for numerous industrial uses and provides health and occupational safety information for this product. Most foils are produced from cast ingots for use in coating and thin film Chemical Vapor Deposition (CVD) and Physical Vapor Deposition (PVD) processes including Ultra High Purity (99.9+%) thin film foil Thermal and Electron Beam (E-Beam) Evaporation, Low Temperature Organic Evaporation, Atomic Layer Deposition (ALD), Organometallic and Chemical Vapor Deposition (MOCVD) for specific applications such as fuel cells and solar energy. Thickness can range from 0.003" to approximately 2mm for all metals. Some metals can also be rolled down as thin as 0.001" for use as an evaporation source in microelectronics, optics, magnetics, MEMS, and hard resistant coatings. Piece sizes are available up to approximately 7" maximum width. Maximum lengths of about 20" can be obtained with a nominal thickness between about 0.005" and 0.020" for thin film deposition on glass or metal substrates. Materials are produced using crystallization, solid state and other ultra high purification processes such as sublimation. ATT specializes in producing custom compositions for commercial and research applications and for new proprietary technologies. ATT also casts any of the rare earth metals and most other advanced materials into rod, bar, or plate form, as well as other machined shapes and through other processes such as nanoparticles and in the form of solutions and organometallics. We also produce Scandium as rods, powder and plates. Other shapes are available by request.
Please contact us if you need customized services. We will contact you with the price and availability in 24 hours.
| Product | Product Code | Purity | Size | Contact Us |
Product Information
ATT specializes in producing Scandium High Purity Foil and sheets in many thicknesses and sizes for numerous industrial uses and provides health and occupational safety information for this product. Most foils are produced from cast ingots for use in coating and thin film Chemical Vapor Deposition (CVD) and Physical Vapor Deposition (PVD) processes including Ultra High Purity (99.9+%) thin film foil Thermal and Electron Beam (E-Beam) Evaporation, Low Temperature Organic Evaporation, Atomic Layer Deposition (ALD), Organometallic and Chemical Vapor Deposition (MOCVD) for specific applications such as fuel cells and solar energy. Thickness can range from 0.003" to approximately 2mm for all metals. Some metals can also be rolled down as thin as 0.001" for use as an evaporation source in microelectronics, optics, magnetics, MEMS, and hard resistant coatings. Piece sizes are available up to approximately 7" maximum width. Maximum lengths of about 20" can be obtained with a nominal thickness between about 0.005" and 0.020" for thin film deposition on glass or metal substrates. Materials are produced using crystallization, solid state and other ultra high purification processes such as sublimation. ATT specializes in producing custom compositions for commercial and research applications and for new proprietary technologies. ATT also casts any of the rare earth metals and most other advanced materials into rod, bar, or plate form, as well as other machined shapes and through other processes such as nanoparticles and in the form of solutions and organometallics. We also produce Scandium as rods, powder and plates. Other shapes are available by request.
Scandium (Sc) Foil Synonyms
GF23527953, GF79587994, GF55591162, GF21428153, GF31290207, GF49442137, GF27459647, 00294, 12424, 12426, 43219
Scandium (Sc) Foil Specification
Dimensions
Per your request or drawing
We can customized as required
Properties（Theoretical）
| Molecular Weight | 44.96 |
| Appearance | Silvery |
| Melting Point | 1541 °C |
| Boiling Point | 2830 °C |
| Density | 2985 kg/m3 |
| Solubility in H2O | N/A |
| Electrical Resistivity | 61.0 microhm-cm @ 22 °C |
| Electronegativity | 1.3 Paulings |
| Heat of Fusion | 3.80 Cal/gm mole |
| Heat of Vaporization | 81 K-Cal/gm atom at 2831 °C |
| Poisson's Ratio | 0.279 |
| Specific Heat | 0.133 Cal/g/K @ 25 °C |
| Tensile Strength | N/A |
| Thermal Conductivity | 0.158 W/cm/K @ 298.2 K |
| Thermal Expansion | r.t.) (?, poly) 10.2 µm/(m·K) |
| Vickers Hardness | N/A |
| Young's Modulus | 74.4 GPa |
Scandium Application
Scandium Metal is applied in various superalloys which show excellent metallic performance with their light gravity. The main application of Scandium by weight is in Scandium-Aluminium alloys for minor aerospace industry components. They were used in the Russian military aircraft, specifically the MiG-21 and MiG-29. Some items of sports equipment, which rely on high-performance materials, have been made with Scandium-Aluminium alloys. Employed in solid-state synthesis of unusual clusters, Sc19Br28Z4, (Z=Mn, Fe, Ru, or Os). These clusters are of interest for their structure and magnetic properties.
Packing of Scandium (Sc) Foil
Standard Packing:
Typical bulk packaging includes palletized plastic 5 gallon/25 kg. pails, fiber and steel drums to 1 ton super sacks in full container (FCL) or truck load (T/L) quantities. Research and sample quantities and hygroscopic, oxidizing or other air sensitive materials may be packaged under argon or vacuum. Solutions are packaged in polypropylene, plastic or glass jars up to palletized 440 gallon liquid totes Special package is available on request.
ATTs’Scandium (Sc) Foil is carefully handled to minimize damage during storage and transportation and to preserve the quality of our products in their original condition.
Chemical Identifiers
| Linear Formula | Sc |
| CAS # | 7440-20-2 |
| MDL Number | MFCD00016323 |
| EC No. | 231-129-2 |
| Beilstein/Reaxys No. | N/A |
| Pubchem CID | 23952 |
| SMILES | [Sc] |
| InchI Identifier | InChI=1S/Sc |
| InchI Key | SIXSYDAISGFNSX-UHFFFAOYSA-N |
