Product Code :
P-type silicon sputtering target is dark gray with a bluish tinge. Silicon is a chemical element that originated from the Latin ‘silex’ or ‘silicis’, meaning flint. It was first mentioned in 1824 and observed by J. Berzelius. The isolation was later accomplished and announced by J. Berzelius. “Si” is the canonical chemical symbol of silicon. Its atomic number in the periodic table of elements is 14 with a location at Period 3 and Group 14, belonging to the p-block. The relative atomic mass of silicon is 28.0855(3) Dalton, the number in the brackets indicating the uncertainty.
Please contact us if you need customized services. We will contact you with the price and availability in 24 hours.
Product Information
P-type silicon sputtering target is dark gray with a bluish tinge. Silicon is a chemical element that originated from the Latin ‘silex’ or ‘silicis’, meaning flint. It was first mentioned in 1824 and observed by J. Berzelius. The isolation was later accomplished and announced by J. Berzelius. “Si” is the canonical chemical symbol of silicon. Its atomic number in the periodic table of elements is 14 with a location at Period 3 and Group 14, belonging to the p-block. The relative atomic mass of silicon is 28.0855(3) Dalton, the number in the brackets indicating the uncertainty.
ATT provides high-quality P-type silicon Sputtering Target for research and industry purposes at competitive prices. We can provide P-type silicon Sputtering Target with different purity, size, and density according to your requirements.
Chemical Formula: Si
CAS Number: 7440-21-3
Synonyms
Polysilicon, poly-Si, electronic grade (eg) polysilicon, silicon polycrystal
P-type Silicon Sputtering Target Specification
Size:
Circular Sputtering Targets | Diameter | 1.0”2.0”3.0”4.0”5.0”6.0”up to 21” |
Rectangular Sputtering Targets | Width x Length | 5” x 12”5” x 15”5” x 20”5” x 22”6” x 20” |
Thickness | 0.125”, 0.25” |
Purity: 99.9%, 99.95%, 99.99%, 99.995%, 99.999%
Shape: Disc/Rectangular/Tube
Bonding: Unbonding/Bonding
Per your request or drawing
We can customized as required
Properties(Theoretical)
Molecular Weight | 28.08 |
Appearance | Silvery |
Melting Point | 1414 °C |
Boiling Point | 2900 °C |
Density | 2330 kg/m3 |
Solubility in H2O | N/A |
Electrical Resistivity | 3-4 microhm-cm @ 0 °C |
Electronegativity | 1.8 Paulings |
Heat of Fusion | 9.47 Cal/gm mole |
Heat of Vaporization | 40.6 K-Cal/gm atom at 2355 °C |
Poisson's Ratio | 0.064 - 0.28 |
Specific Heat | 0.168 Cal/g/K @ 25 °C |
Tensile Strength | N/A |
Thermal Conductivity | 1.49 W/cm/K @ 298.2 K |
Thermal Expansion | (25 °C) 2.6 µm·m-1·K-1 |
Vickers Hardness | N/A |
Young's Modulus | 51-80 GPa |
Sputtering Targets Requirements
General requirements such as size, flatness, purity, impurity content, density, N/O/C/S, grain size, and defect control. Special requirements include surface roughness, resistance value, grain size uniformity, composition and tissue uniformity, magnetic conductivity, ultra-high density, ultra-fine grains, etc.
Application of P-type Silicon Sputtering Target
The P-type silicon sputtering target is used for thin film deposition, decoration, semiconductor, display, LED and photovoltaic devices, functional coating as nicely as other optical information storage space industry, glass coating industry like car glass and architectural glass, optical communication, etc.
Other applications of silicon are:
Solar cells
Transistors
Semiconductors
Rectifiers and other solid-state devices that are used widely in the electronics and space sectors.
P-type Silicon Sputtering Target Handling Notes
1、Indium bonding is recommended for P-type silicon sputtering target, due to some of its characteristics not amenable to sputtering like brittleness, low thermal conductivity, etc.
2、This material has a low thermal conductivity and is susceptible to thermal shock.
Packing of P-type Silicon Sputtering Target
Standard Packing:
Typical bulk packaging includes palletized plastic 5 gallon/25 kg. pails, fiber and steel drums to 1 ton super sacks in full container (FCL) or truck load (T/L) quantities. Research and sample quantities and hygroscopic, oxidizing or other air sensitive materials may be packaged under argon or vacuum. Solutions are packaged in polypropylene, plastic or glass jars up to palletized 440 gallon liquid totes Special package is available on request.
ATTs’P-type Silicon Sputtering Target is carefully handled to minimize damage during storage and transportation and to preserve the quality of our products in their original condition.
Chemical Identifiers
Linear Formula | Si |
MDL Number | MFCD00085311 |
EC No. | 231-130-8 |
Beilstein/Reaxys No. | N/A |
Pubchem CID | 5461123 |
SMILES | [Si] |
InchI Identifier | InChI=1S/Si |
InchI Key | XUIMIQQOPSSXEZ-UHFFFAOYSA-N |