Selenium (Se) Sputtering Target Supply

Selenium (Se) Sputtering Target

Product Code : ST-Se-5N-Cu

Selenium sputtering target is a material that is used to coat or treat other materials using a sputtering technique. It is generally formed as thin layers of material, which are then released onto the surface of a substrate. This is accomplished by accelerating Selenium ions in a magnetically contained plasma, which causes them to collide with the substrate and stick to it. The two most common types of sputtering targets are evaporative and reactive sputtering. Evaporative sputtering requires a gaseous or liquid form of Selenium, while reactive sputtering uses a compound of two or more elements. The sputtering target can be tailored to enhance different properties of the surface of the substrate, such as its electrical or thermal conductivity, optical absorption or reflectance, and adhesion.

Product Information

Chemical Formula: Se
CAS Number: 7782-49-2

Synonyms

N/A

Selenium (Se) Sputtering Target Specification

Shape: Disc/Rectangular/Tube

Bonding: Unbonding/Bonding

Per your request or drawing

We can customized as required

Size：

Circular Sputtering Targets	Diameter	1.0”2.0”3.0”4.0”5.0”6.0”up to 21”
Rectangular Sputtering Targets	Width x Length	5” x 12”5” x 15”5” x 20”5” x 22”6” x 20”
Thickness		0.125”, 0.25”

Properties（Theoretical）

Molecular Weight	78.96
Appearance	Gray to black solid
Melting Point	217 °C
Boiling Point	684.9 °C
Density	4.79 g/cm³
Solubility in H2O	N/A
Electrical Resistivity	106 microhm-cm @ 0°C
Electronegativity	2.4 Paulings
Heat of Vaporization	3.34 K-cal/gm atom at 684.9 °C
Poisson's Ratio	0.33
Specific Heat	0.767 Cal/g/K @ 25 °C
Tensile Strength	N/A
Thermal Conductivity	0.00519 W/cm/K @ 298.2 K
Thermal Expansion	(25 °C) (amorphous) 37 µm·m^-1·K^-1
Vickers Hardness	N/A
Young's Modulus	10 GPa

Sputtering Targets Requirements

General requirements such as size, flatness, purity, impurity content, density, N/O/C/S, grain size, and defect control. Special requirements include surface roughness, resistance value, grain size uniformity, composition and tissue uniformity, magnetic conductivity, ultra-high density, ultra-fine grains, etc.

Application of Selenium (Se) Sputtering Target

Selenium (Se) Sputtering Target is mainly used in the electronics and information industry, glass coating field, wear-resistant materials, high-temperature corrosion resistance, high-grade decorative goods, and other industries.

Packing of Selenium (Se) Sputtering Target

Standard Packing:

Typical bulk packaging includes palletized plastic 5 gallon/25 kg. pails, fiber and steel drums to 1 ton super sacks in full container (FCL) or truck load (T/L) quantities. Research and sample quantities and hygroscopic, oxidizing or other air sensitive materials may be packaged under argon or vacuum. Solutions are packaged in polypropylene, plastic or glass jars up to palletized 440 gallon liquid totes Special package is available on request.

ATTs’Selenium (Se) Sputtering Target is carefully handled to minimize damage during storage and transportation and to preserve the quality of our products in their original condition.

Chemical Identifiers

Linear Formula	Se
MDL Number	MFCD00134090
EC No.	231-957-4
Beilstein/Reaxys No.	N/A
Pubchem CID	N/A
SMILES	[Se]
InchI Identifier	InChI=1S/Se
InchI Key	BUGBHKTXTAQXES-UHFFFAOYSA-N

Product	Product Code	Purity	Size	Contact Us
Selenium (Se) Sputtering Target	ST-Se-2N-Cu	99%	Customize
Selenium (Se) Sputtering Target	ST-Se-3N-Cu	99.9%	Customize
Selenium (Se) Sputtering Target	ST-Se-4N-Cu	99.99%	Customize
Selenium (Se) Sputtering Target	ST-Se-5N-Cu	99.999%	Customize