Strontium Tape

Product Information

Strontium bands are often used as a strong, lightweight outer coating. In addition, tape can act as an adhesive to hold two objects together. ATT produces a number of standard grades where applicable, including the Mil Spec(military grade); ACS, reagents and technical grades; Food, agriculture and pharmaceutical grades; Optical grades, USP and EP/BP(European Pharmacopoeia/British Pharmacopoeia), and follow applicable ASTM test standards. ATT specializes in the production of strontium high purity tapes and sheets in a wide range of thicknesses and sizes for numerous industrial uses and provides health and occupational safety information on this product. Most tapes are produced from ingots for coating and film chemical vapor deposition (CVD) and physical vapor deposition (PVD) processes, including thermal and electron beam (electron beam) evaporation, low temperature organic evaporation, atomic layer deposition (ALD), organometallic and chemical vapor deposition (MOCVD) and other specific applications such as fuel cells and solar energy. Strontium bands are usually long, thin bands of metal strontium. All metals range in thickness from 0.003 "to about 2mm. Some metals can also be rolled as thin as 0.001 "and are used as evaporation sources for microelectronics, optical, magnetic, MEMS, and hard-resistant coatings. Sheet size up to a maximum width of approximately 7 ". For film deposition on a glass or metal substrate, a maximum length of about 20" can be obtained, with a nominal thickness between about 0.005" and 0.020". Materials are produced by ultra-high purification processes such as crystallization, solid state and sublimation. ATT specializes in the production of custom compositions for commercial and research applications as well as new proprietary technologies. ATT also casts any rare earth metal and most other advanced materials into bars, rods or plates, and other mechanical shapes, and in solution and organometrics through other processes such as nanoparticles. Other shapes are available upon request. Strontium bands are used as protective coatings on a variety of materials. Tape is also used for packaging applications.

ATT is a professional supplier of strontium tape, and we also manufacture tablets, balls, ingots, balls, flakes, powders, rods, threads, sputtering targets, and many other forms and custom shapes. Other shapes are available upon request.

Synonyms

Strontium Tape Properties (Theoretical)

Applications of Strontium Tape

A soft, silvery metal that burns in air and reacts with water. Strontium is best known for the brilliant reds its salts give to fireworks and flares. It is also used in producing ferrite magnets and refining zinc. Modern 'glow-in-the-dark' paints and plastics contain strontium aluminate.

Packing of Strontium Tape

Standard Packing:

Typical bulk packaging includes palletized plastic 5 gallon/25 kg. pails, fiber and steel drums to 1 ton super sacks in full container (FCL) or truck load (T/L)s quantities. Research and sample quantities and hygroscopic, oxidizing or other air sensitive materials may be packaged under argon or vacuum. Solutions are packaged in polypropylene, plastic or glass jars up to palletized 440 gallon liquid totes Special package is available on request.

ATTs’Strontium Tape is carefully handled to minimize damage during storage and transportation and to preserve the quality of our products in their original condition.

Chemical Identifiers