Zinc Shavings

Product Information

Zinc chips are a by-product of milling and grinding metal operations. Shavings are produced by shaving or cutting metal and then collected for recycling. ATT specializes in the production of high-purity zinc chips with minimum average grain sizes for the preparation of pressing and bonding sputtering targets, as well as chemical vapor deposition (CVD) and physical vapor deposition (PVD) processes, including thermal and electron beam (E-Beam) evaporation, low temperature organic evaporation, atomic layer deposition (ALD), metal-organic and chemical vapor deposition (MOCVD). Zinc shavings are elongated bands. Shavings are also useful in any application that requires a high surface area, such as water treatment, fuel cells, and solar energy applications. Nanoparticles can also produce very high surface areas. Our standard shavings have average particle sizes of -325 mesh, -100 mesh, 10-50 micron and sub-micron (< 1 micron). We can also provide many nanoscale materials. ATT produces a number of standard grades where applicable, including the Mil Spec(military grade); ACS, reagents and technical grades; Food, agriculture and pharmaceutical grades; Optical grades, USP and EP/BP(European Pharmacopoeia/British Pharmacopoeia), and follow applicable ASTM test standards. Typical and custom packaging is available. Other shapes are available upon request. Nanocrystalline structures have been found in metal shavings with high strength and wear resistance.

ATT is a professional supplier of Zinc Shavings, and we also produce flakes, balls, ingots, balls, flakes, powders, rods, wires, sputtering targets, and many other forms and custom shapes. Other shapes are available upon request.

Synonyms

Zinc Shavings Properties (Theoretical)

Applications of Zinc Shavings

Zinc is also used in alloys such as brass, nickel silver and aluminium solder. Zinc oxide is widely used in the manufacture of very many products such as paints, rubber, cosmetics, pharmaceuticals, plastics, inks, soaps, batteries, textiles and electrical equipment.

Packing of Zinc Shavings

Standard Packing:

Typical bulk packaging includes palletized plastic 5 gallon/25 kg. pails, fiber and steel drums to 1 ton super sacks in full container (FCL) or truck load (T/L)s quantities. Research and sample quantities and hygroscopic, oxidizing or other air sensitive materials may be packaged under argon or vacuum. Solutions are packaged in polypropylene, plastic or glass jars up to palletized 440 gallon liquid totes Special package is available on request.

ATTs’Zinc Shavings is carefully handled to minimize damage during storage and transportation and to preserve the quality of our products in their original condition.

Chemical Identifiers